How To Shunt Mod An Ebike Controller – The Easiest Way Possible
Do you want to know how to shunt mod an ebike controller? If so, this blog is for you!
We all want to save as much money as we can in the build process. Especially on things we don’t need or use. One of those things is the shunt mod on the Cycle Analyst Ebike Controllers.
The shunt mod is used to lower the current of the controller to accommodate for a bigger battery. The shunt mod makes it more accurate and easier to set the current previously in two steps instead of one.
In this article, we will walk you through the process of shunt modding your Ebike controller. We’ll also be explaining what shunt mod is, what SHUNT MOD Ebike Controller is, and how to do it.
So if you’re looking to get more out of your riding experience, read on!
What is shunt mod?
Shunt mods are modifications that can be done to an ebike controller to improve power delivery. This modification increases the voltage going through the battery, making it easier to ride longer distances and go faster.
Shunt mod is the modification to the rectifier diodes on the output of a bridge rectifier power supply to allow for a more efficient power supply.
The diodes in a bridge rectifier on the output of a power supply are usually arranged like an ‘H’ with the rectifiers on the left, center and right. These are usually referred to as a type 1 configuration.
The diodes are designed in this way to allow the power supply to be able to rectify AC input for use with a PWM controller such as a PC Power Supply Unit.
There are many different types of shunt mods available, so it’s important to find one that suits your needs.
To install a shunt mod, first remove the stock controller from your bike and replace it with the modified version.
Once you have replaced the controller, simply connect it to the bike and start riding!
What Is SHUNT MOD Ebike Controller?
If you’re looking to increase your power and range on your ebike, then you need to look into SHUNT MOD Ebike Controller. This modification allows you to change the gear ratio, making it more comfortable and efficient.
SHUNT MOD is an electronic bypass controller that works as a “Tesla style” electronic speed controller on regular bikes. It is used to avoid the resistors or other speed limiters and time limiters found on ebike controller systems.
Using the SHUNT MOD, you can power your motor at 100% of the rated input current, meaning you can use your full motor power continuously.
The main benefit of this controller is that you can add more batteries without having to upgrade your controller and void your warranty.
This way you can run more powerful motors and larger loads on a smaller and lighter battery pack, saving you money.
Simply use a DC converter to convert your battery voltage to the voltage your original controller runs at. The SHUNT MOD does the rest.
Plus, it gives you that extra boost you need to get where you’re going faster. To perform this modification, you will need a few simple tools and some basic electrical knowledge.
Once you have completed the installation, your ebike will be ready to ride in no time!
How Do You Mod An Ebike Controller?
Thanks to the ever-growing popularity of ebikes, many people are now using them to get a good workout. However, not all people are comfortable riding an ebike, which can be frustrating.
That’s where shunt mods come in. Shunt mods allow you to turn the throttle on and off remotely, which makes it much easier to ride an ebike. There are many different types of shunt mods available, so it’s important to find one that’s compatible with your controller.
Modifying an ebike controller is the only way to achieve the best performance out of your electric bike. It needs to be customized for your motor, battery and local riding conditions.
First, you will need to gather the necessary parts :
1. Battery charger
2. Motor controller
3. 12 Volt diagnostic volt meter
4. 8 mm test leads
5. Power supply
6. Soldering iron
7. Desoldering tool
9. Electrical tape
10. 2.1 mm socket
11. Heat shrink tubing
12. Wire cutters
13. Wire strippers
14. Long nose pliers
15. Torx driver
16. Torx wrench (T-30)
17. Allen wrench (6 mm)
19. Multi meter
20. Wire brush
21. Computer with internet access
23. Building knowledge
To modify your controller, you will need to turn it into a 24 volt controller. Most kits come with a 36 to 48 volt controller, but the 36 volt controller is too weak for most kits, and the 48 volt controller is too strong for most kits. To turn a 36 volt controller into a 24 volt controller,
Once you have installed your shunt mod, all you need is some practice to get used to it. Riding an ebike is a great way to get in shape, and with the help of a shunt mod, it can be a lot easier and more fun too!
How to shunt mod an ebike controller?
An electric bicycle controller is the brain quite literally. It tells the motor when to spin the pedals. It is the key component to any electric bicycle conversion. They come in a few different styles.
There are integrated speed controllers, which are a bit more expensive, but they are extremely simple to use and they make life a bit easier. Then there are throttle style electric bicycle controllers.
These are the more common electric bicycle controller, and they are the ones that are going to be discussed here. Shunt voltage controllers are used by a number of companies.
Modding your ebike is a great way to make it more powerful or comfortable. It’s simple and easy to do, so anyone can do it.
There are many different mods that you can use on an ebike controller, so find the one that fits your needs.
Once you’ve installed the mods, be sure to test the bike before riding it out in public! Finally, always wear a helmet when modifying or riding an ebike, as safety is always paramount.
What you should expect after MOD your ebike controller?
Congratulations on your decision to MOD your controller! Shunting a bike is one of the most important aspects of e-bike riding, and a poorly tuned controller can make the experience frustrating and difficult.
To make things as easy as possible for you, we’ve put together a guide that will explain what you should expect after MODing your controller.
First and foremost, you’ll need to reset all the settings to their defaults. This includes restoring the controller’s default settings, calibrating your sensor, and ensuring that your battery is fully charged before riding.
After that, it’s just a matter of getting out there and having some fun!
Benefits of MOD your E-Bike Controller?
Ebike controllers come with a variety of different power outputs. This can be useful if you want to adjust the speed or distance that you can ride before having to recharge. However, many riders find that they want to MOD their controller in order to adjust the power output to their liking.
There are many different types of mods available, so be sure to find one that fits your needs and preferences. Modifying your controller is a simple process that can be done in just minutes.
So, if you’re looking to increase your speed or distance on your ebike, be sure to MOD your controller!
Ease of Cycling
Cycling is a great way to get your cardio fitness routine in and also helps to improve your overall physical conditioning. However, cycling on uneven terrains can be quite challenging especially if you’re not used to it.
Thankfully, there are various ebike controllers available that make it easier for you to cycle on any type of terrain.
Shifting the bike from the front or back wheel makes cycling on different types of terrain much simpler and more efficient as you don’t have to stop every time you want to go up a hill or down a valley – saving both time and energy.
Furthermore, with MODing an ebike controller, cycling becomes more fun as well!
Pull More Weights
When it comes to electric bikes, there’s no doubt that they offer a lot of benefits. However, while they can be used for commuting and leisure activities alike, you might find that you’re not getting the most out of them. That’s where shunt modding comes in: this simple process allows you to increase your strength and power on an ebike controller significantly.
Plus, shunt modding is a quick and easy way to customize your ride – making it more fun along the way!
If you’re a heavy rider, your ebike is probably struggling to handle the extra weight. This can result in damage to your hub motor and battery, as well as fatigue on your part.
A better option would be to mod your controller so that the bike’s weight is evenly distributed across the pedals. This will reduce strain on these parts and improve overall performance.
Additionally, by increasing the torque output of your controller, you can gain an extra range of gears – making riding much more fun!
Disadvantages of MOD E-Bike Controller
If you’re looking for an easy way to shunt your ebike controller, then a MOD bike controller might be the right option for you. These controllers are popular because they allow you to adjust the torque and power output of your ebike.
However, MODs can be difficult to install and maintain, which can lead to various disadvantages.
For starters, mods increase the complexity of your wiring system, which may lead to problems down the road. Additionally, MODs can over-revolve your motor, causing it to wear down quickly.
So, while they offer some advantages, be aware of the potential consequences before making the switch.
Voiding the warranty on your bike is a tricky and risky process that should only be attempted by experts. If you don’t have the necessary skills or experience, it would be best to avoid doing so altogether. Additionally, shunning your MOD ebike controller could damage it badly enough to render it useless – this means lost money for you!
Possible Motor Damage
When installing a MOD controller on your ebike, it’s important to be aware of the possible risks. By bypassing the stock controller, you’re running the risk of frying your motor – or worse.
Fortunately, there are various ways to shunt your mod controller without damaging your bike. In this blog post we’ll show you how. Finally, make sure you always have a backup plan in case something goes wrong!
More Battery Consumption
If you’re looking to enjoy a longer ride on your bike, then it’s important to ensure that it is fitted with a MOD controller. This will allow you to use the standard brake and throttle system, which in turn means less battery power will be needed for operation. Moreover, the noise level from the brakes and throttle can also be quite loud – making riding on your bike uncomfortable or even unbearable at times.
Furthermore, if your bike isn’t fitted with a MOD controller, then you are severely restricted in terms of its performance and range – meaning that trips might not be as fulfilling as they could potentially be. So make sure to get yourself one of these essential accessories!
One of the main disadvantages of MOD ebike controllers is that they generate a lot of heat inside them. This can be uncomfortable, especially if you are using it in warm weather conditions.
To avoid this problem, you can shunt mod your controller. This is an easy and simple way to solve the issue and will allow you to better control your bike’s power output. Additionally, modding enables you to tailor your ride according to your personal needs and preferences.
So, make sure that it’s done correctly so as not to damage your bike in the process!
How Do You Shunt Mod An Ebike Controller? Frequently Asked Questions
What is a shunt mod, and how does it work?
A shunt mod is a modification to an ebike controller that allows for more current to be drawn from the battery. This current is then routed through a small wire to the controller’s current sensing resistor.
The controller can then read higher currents than it was originally designed for and, as a result, increase the power output of the motor.
It is important to note that improper installation of a shunt mod can cause damage to your bike’s components. So, make sure to do your research before making this modification to your ebike controller.
Can I install a shunt mod on my Ebike controller without any tools?
No, it is not recommended to install a shunt mod on your Ebike controller without any tools. To do so could result in damage to the controller and potentially injury.
Plus, you’ll need to open up the controller in order to install the shunt mod and this can be risky depending on the model of Ebike you are working with. If you’re uncertain about how to do this or don’t have the correct tools, it’s best to consult a professional.
Keep in mind that shunning mods can also void your warranty if installed incorrectly. Always take care when modifying your Ebike controller as any mistakes could lead to injuries.
How do I remove the shunt mod if I want to uninstall it?
To uninstall the shunt mod, first disconnect the power from the ebike controller.
Then, carefully unscrew the shunt mod from the ebike controller. Make sure to remove any plastic covers that were removed during installation.
Finally, reinstall any plastic covers that were removed. Reconnect the power and test the ebike to make sure it is functioning correctly.
Is there any danger in using a shunt mod on my Ebike controller?
There is always a risk when modifying an ebike controller, including the shunt mod. This modification can increase the current draw of your ebike, which can cause problems with the battery and motor if not done correctly.
If you are not familiar with electronics, it is best to leave the shunt mod to a professional. Make sure to read up on safe practices and follow all safety guidelines before attempting any modifications.
If you’re looking to shunt mod your ebike controller in the easiest way possible, then look no further! This step-by-step guide will show you how to mod your controller in the easiest way possible, and it’s totally optional.
So if you’re ready to take your ebike riding to the next level, then make sure to check out this guide!